Choose language


Responsible for these pages:

Huf Hülsbeck & Fürst GmbH & Co. KG 

Communications and Public Relations Department

Steeger Str. 17 

42551 Velbert / Germany 

Postfach 10 04 80 

42504 Velbert / Germany 

Telephone: +49 (0)2051 272-0 

Fax central: +49 (0)2051 272-207 

Fax BOD : +49 (0)2051 272-460  

E-Mail: info(at) 

Huf Hülsbeck & Fürst GmbH & Co. KG is a limited commercial partnership registered under German law in Wuppertal, with headquarters in Velbert, Germany.  

Registeration No. HR A 20794.

Huf Industrieverwaltung GmbH with headquarters in Velbert is the personally liable partner registered under German law in Wuppertal, Germany.

Registeration No. HR B 17217.

Chief Operating Officers: Thomas Tomakidi, Tom Graf, Michael Supe.  

VAT identification NO.:  DE 121544714



Content of the online presence

The author shall assume no liability for the topicality, correctness or quality of the information provided. Claims for liability against author which are based upon damage of a material or immaterial type, caused through the use or non-use of the information represented or through the use of incorrect or incomplete information, shall be fundamentally excluded provided it cannot be proved that the author acted with intent and/or was grossly negligent. All offers are without engagement and non-binding. The author expressly reserves the right to modify, supplement or delete sections of the pages or the entire offer without specific notification or to suspend publication temporarily or entirely.


References and links

Liability in the case of direct or indirect references to third-party web pages (links), outside the area of responsibility of the author, may only be derived when the author has knowledge of the content and when it would be technically possible and reasonable to prevent a use of any illegal content. Therefore, the author declares expressly that at the time of setting-up the links no illegal content on the pages to be linked was recognisable. The author has no influence whatsoever on the current and future design, content or copyright status of the linked pages. He/She, therefore, distance him/herself expressly from any content on the linked pages that was/has been modified since the links were set-up. This statement applies to all links and references set-up by the author within own internet presence as well as to all third-party entries in guest books, discussion forums, link directories, mailing lists and any other types of database to whose content written access is possible from external sources. The provider of the page to which reference is made shall be solely liable for any illegal, incorrect or incomplete content and, in particular, for any damage ensuing from a use or non-use of such types of information represented and not that party that merely makes reference to respective publications via links.


Copyrights and trademark rights

In all publications the author shall endeavour to observe the copyrights associated with the graphics, sound documents, video sequences and texts used, to utilise graphics, sound documents, video sequences and texts prepared by author him/herself or to fall back on graphics, sound documents, video sequences and texts that are licence-free. All brands and trademarks mentioned within the internet presence and possibly protected by third parties shall be unlimitedly subject to the provisions of the currently valid trademark legislation and the ownership rights of the respectively registered owner. It may not be concluded from a simple mention that trademarks are not protected by third-party rights! The copyright for published objects, furnished by author him/herself, shall remain solely with the author of the pages. Any duplication or utilisation of such graphics, sound documents, video sequences and texts in other electronic or printed publications shall not be permissible without the express consent of the author.


Legal validity of the disclaimer

This disclaimer of liability is to be regarded as a part of the internet presence to which reference has been made on this page. Should parts or individual formulations in this text not, no longer or not fully be compatible with current legislation, the remaining parts of the document shall remain unaffected by this in their content and validity.


Latest Update: 2nd January 2019

System Lead Engineer - Wireless Products

Job Title
System Lead Engineer - Wireless Products
Employer Description
Short Job Description
Job Description

Job Purpose/Scope: 

This position will own the responsibility for the successful development, launch and support of wireless product systems for the Huf Group organization. This position will assume the leadership role for the system in assuring that all requirements for the system (Huf internal and external) are captured and the development of the system shows clear traceability and compliance to these requirements.

Job Duties/Responsibilities:

  • Fulfillment of product requirements
    Keeping to the budget for the product development cost
    -  Being in line with the project time schedule
    -  Contribution to the achievement of the overall project targets
  • Coordinating efforts among different engineering teams and locations and ensuring adhereance to schedules and Vmodel guidelines
  • Support customer meetings representing product development
  • Support internal team meetings to ensure all groups have the required information required to meet project objectives
  • Support the creation of the system architecture
  • Coordinate with Component Lead Engineers to ensure compliance to the system architecture
  • Work with other supporting groups (validation, prototype, industrial engineering, program management, quality, sales and purchasing) to ensure a common understanding of the system

    Essential Functions:

    Acts within assigned acquisitions / projects:
    Contributes to the definition of the acquisition strategy and its implementation
    -  Plans and coordinates the product development activities
    -  Manages the product development capacities
    -  Supports the project manager regarding product development issues
    -  Decides about the acceptance of customer product requirements
    -  Decides about the definition of product requirements
    -  Decides about the definition of system requirements
    -  Defines the system architecture
    -  Coordinates the creation of the design verification plan
    -  Decides about the release of work products
    -  Carries out the system integration
    -  Decides about the system test preconditions
    -  Carries out the vehicle integration and checks preconditions of the test
    -  Contributes to the vehicle integration test
    -  Contributes to the preparation of verification results
    -  Coordinates the design review 3
    -  Decides in the design reviews about the release of the product design

    Supervision Received and Given: 

    The System Lead Engineer is responsible for the delivery of the intended system therefore will provide guidance to the product development team to confirm all expectations and requirements for the system is met. This position will report to the Engineering Manager.

    Educational Requirements: 

    Minimum Bachelor’s degree in Electronics or Mechanical Engineering required

    Systems engineering degree preferred


  • Minimum 5 years experience in system engineering function or 7 years in Sr. level automotive engineering
  • Membership in INCOSE desired
  • Experience in launching minimum 3 projects for an automotive OEM preferred
  • Knowledge of the V-model development process is desired.
  • Technical judgment to solve problems
  • Good written and oral communication skills
  • Good organization skills (ability to track project timing and costs)
  • Good customer communication skills
  • Experience with MS Office tools (Excel/Powerpoint/Word/Project)
  • Experience with DOORS requirements capture is a strong desire
  •  Experience with ASPICE and/or CMMI level 2 or higher process standards preferred

    Specialized Working Conditions and % Travel:  (i.e.: hearing, vision, extreme temperatures)

    Occasional travel (<15%) locally (within 50 mile radius) of work place to support project meetings. Occasional international travel (<15%) (Germany, Mexico, Romania, China) to support training, workshops and project related items.

Job Requirements
Job Benefits

We offer:

  • Competitive salary package
  • Motivating job contributing to the most advanced automotive technology
  • Be part of a friendly environment and work with experienced colleagues
Apply Information

Apply online at:

Job Type
Contract Type
Farmington Hills (MI), USA
Michael Baker
Huf North America
Michael Baker
24860 Hathaway St.
Farmington Hills, MI 48335
Phone: (248)991-3613
Employees with previous experience