Choose language


Responsible for these pages:

Huf Hülsbeck & Fürst GmbH & Co. KG 

Communications and Public Relations Department

Steeger Str. 17 

42551 Velbert / Germany 

Postfach 10 04 80 

42504 Velbert / Germany 

Telephone: +49 (0)2051 272-0 

Fax central: +49 (0)2051 272-207 

Fax BOD : +49 (0)2051 272-460  

E-Mail: info(at) 

Huf Hülsbeck & Fürst GmbH & Co. KG is a limited commercial partnership registered under German law in Wuppertal, with headquarters in Velbert, Germany.  

Registeration No. HR A 20794.

Huf Industrieverwaltung GmbH with headquarters in Velbert is the personally liable partner registered under German law in Wuppertal, Germany.

Registeration No. HR B 17217.

Chief Operating Officers: Thomas Tomakidi, Tom Graf, Michael Supe.  

VAT identification NO.:  DE 121544714



Content of the online presence

The author shall assume no liability for the topicality, correctness or quality of the information provided. Claims for liability against author which are based upon damage of a material or immaterial type, caused through the use or non-use of the information represented or through the use of incorrect or incomplete information, shall be fundamentally excluded provided it cannot be proved that the author acted with intent and/or was grossly negligent. All offers are without engagement and non-binding. The author expressly reserves the right to modify, supplement or delete sections of the pages or the entire offer without specific notification or to suspend publication temporarily or entirely.


References and links

Liability in the case of direct or indirect references to third-party web pages (links), outside the area of responsibility of the author, may only be derived when the author has knowledge of the content and when it would be technically possible and reasonable to prevent a use of any illegal content. Therefore, the author declares expressly that at the time of setting-up the links no illegal content on the pages to be linked was recognisable. The author has no influence whatsoever on the current and future design, content or copyright status of the linked pages. He/She, therefore, distance him/herself expressly from any content on the linked pages that was/has been modified since the links were set-up. This statement applies to all links and references set-up by the author within own internet presence as well as to all third-party entries in guest books, discussion forums, link directories, mailing lists and any other types of database to whose content written access is possible from external sources. The provider of the page to which reference is made shall be solely liable for any illegal, incorrect or incomplete content and, in particular, for any damage ensuing from a use or non-use of such types of information represented and not that party that merely makes reference to respective publications via links.


Copyrights and trademark rights

In all publications the author shall endeavour to observe the copyrights associated with the graphics, sound documents, video sequences and texts used, to utilise graphics, sound documents, video sequences and texts prepared by author him/herself or to fall back on graphics, sound documents, video sequences and texts that are licence-free. All brands and trademarks mentioned within the internet presence and possibly protected by third parties shall be unlimitedly subject to the provisions of the currently valid trademark legislation and the ownership rights of the respectively registered owner. It may not be concluded from a simple mention that trademarks are not protected by third-party rights! The copyright for published objects, furnished by author him/herself, shall remain solely with the author of the pages. Any duplication or utilisation of such graphics, sound documents, video sequences and texts in other electronic or printed publications shall not be permissible without the express consent of the author.


Legal validity of the disclaimer

This disclaimer of liability is to be regarded as a part of the internet presence to which reference has been made on this page. Should parts or individual formulations in this text not, no longer or not fully be compatible with current legislation, the remaining parts of the document shall remain unaffected by this in their content and validity.


Latest Update: 2nd January 2019

Mechanical Design Engineer

Job Title
Mechanical Design Engineer
Huf do Brasil
Employer Description

Huf develops and manufactures complete solutions for Car Access Security and Immobilization (CASIM) for the automotive industry and has grown from the tradition of a family business to become a leading partner in the industry with locations worldwide. Our aim is to be the market leader and ensure that we always keep to our corporate vision… the intelligent touch to cars.

Short Job Description
Job Description

Department Purpose:

 Design and development of vehicle access products for the Transportation industry that are best in class, and which meet or exceed customer expectations.

Job Purpose/Scope: 

Engineer and develop Mechanical and/or Mechatronic systems for vehicle access security, and safety products primarily used in the transportation industry. The Mechanical Engineer will be involved in multiple product designs with the expectation to meet the required deadlines of the customer while maintaining the quality and technical requirements of the customer. This position requires a hands-on person, who can meet project deadlines, who is innovative, has cross-functional knowledge, including, but not limited to the following:  Program Management, Testing, Manufacturing and Research and Development.     

Job Duties/Responsibilities:

Essential Functions:

  •  Application of Engineering principles of Mechanical Design, Kinematics, First order structural analysis, dimensional management, Manufacturing methods, and DFMEA.
  • Interface with sales and customers on RFQ items, BOM, exploded views, knowledge of similar      Huf projects, and benchmarking studies.
  • Interface with Product Costing, Manufacturing and other Huf Departments.
  • Communicate and write effectively paying special attention to accuracy of work.
  • Examine and analyze new designs to determine feasibility of operations, tooling, manufacturing and applications.
  • Thorough understanding of the following manufacturing processes as related to product design: Die Casting, Plastic Injection Molding, Stamping, Fine Blanking, Torsion and Compression Springs.
  • Problem solving using 8D's, Red-X, and other tools.
  • Initiate, support, and participate in VAVE activities
  • Take initiatives and introduce new ideas

Supervision Received and Given: 

Reports to the Team Leader, and/or Manager.

Educational Requirements:

Bachelor’s Degree or higher level of education in Mechanical Engineering or related field


  • Minimum 2 years’ experience in Product Design and Development
  • Knowledge of plastics and/or locking mechanisms.
  • Proficiency in Microsoft Word, Excel, PowerPoint and Project
  • Experience using 3D computer graphics (CATIA V5 or UG) is a plus
  • Good knowledge of CAE tools 


Job Requirements
Job Benefits

Specialized Working Conditions and % Travel:  (i.e.: hearing, vision, extreme temperatures)

Close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading; visual inspection involving small defects, small parts.  Sedentary work. Exerting up to 10 pounds of force occasionally and/or negligible amount of force frequently or constantly to lift, carry, push, pull or otherwise move objects. Occasional travel is required.  

Apply Information
Job Type
Contract Type
Atibaia, Brasil
Jerusa Lima
Jerusa Lima
Head of Human Resources / Atibaia, Brazil
Huf do Brasil
Rod D. Pedro I, Km 82,7 - Atibaia - SP – Brasil CEP: 12954-260 – Cx.P. 25.
Recent graduates and apprentices
Employees with previous experience