Choose language

Imprint

Responsible for these pages:

Huf Hülsbeck & Fürst GmbH & Co. KG 

Communications and Public Relations Department

Steeger Str. 17 

42551 Velbert / Germany 

Postfach 10 04 80 

42504 Velbert / Germany 

Telephone: +49 (0)2051 272-0 

Fax central: +49 (0)2051 272-207 

Fax BOD : +49 (0)2051 272-460  

Huf Hülsbeck & Fürst GmbH & Co. KG is a limited commercial partnership registered under German law in Wuppertal, with headquarters in Velbert, Germany.  

Registeration No. HR A 20794.

Huf Industrieverwaltung GmbH with headquarters in Velbert is the personally liable partner registered under German law in Wuppertal, Germany.

Registeration No. HR B 17217.

Chief Operating Officers: Thomas Tomakidi, Dr. Florian Hesse, Johann Palluch.  

VAT identification NO.:  DE 121544714

Disclaimer 

 

Content of the online presence

The author shall assume no liability for the topicality, correctness or quality of the information provided. Claims for liability against author which are based upon damage of a material or immaterial type, caused through the use or non-use of the information represented or through the use of incorrect or incomplete information, shall be fundamentally excluded provided it cannot be proved that the author acted with intent and/or was grossly negligent. All offers are without engagement and non-binding. The author expressly reserves the right to modify, supplement or delete sections of the pages or the entire offer without specific notification or to suspend publication temporarily or entirely.

 

References and links

Liability in the case of direct or indirect references to third-party web pages (links), outside the area of responsibility of the author, may only be derived when the author has knowledge of the content and when it would be technically possible and reasonable to prevent a use of any illegal content. Therefore, the author declares expressly that at the time of setting-up the links no illegal content on the pages to be linked was recognisable. The author has no influence whatsoever on the current and future design, content or copyright status of the linked pages. He/She, therefore, distance him/herself expressly from any content on the linked pages that was/has been modified since the links were set-up. This statement applies to all links and references set-up by the author within own internet presence as well as to all third-party entries in guest books, discussion forums, link directories, mailing lists and any other types of database to whose content written access is possible from external sources. The provider of the page to which reference is made shall be solely liable for any illegal, incorrect or incomplete content and, in particular, for any damage ensuing from a use or non-use of such types of information represented and not that party that merely makes reference to respective publications via links.

 

Copyrights and trademark rights

In all publications the author shall endeavour to observe the copyrights associated with the graphics, sound documents, video sequences and texts used, to utilise graphics, sound documents, video sequences and texts prepared by author him/herself or to fall back on graphics, sound documents, video sequences and texts that are licence-free. All brands and trademarks mentioned within the internet presence and possibly protected by third parties shall be unlimitedly subject to the provisions of the currently valid trademark legislation and the ownership rights of the respectively registered owner. It may not be concluded from a simple mention that trademarks are not protected by third-party rights! The copyright for published objects, furnished by author him/herself, shall remain solely with the author of the pages. Any duplication or utilisation of such graphics, sound documents, video sequences and texts in other electronic or printed publications shall not be permissible without the express consent of the author.

 

Legal validity of the disclaimer

This disclaimer of liability is to be regarded as a part of the internet presence to which reference has been made on this page. Should parts or individual formulations in this text not, no longer or not fully be compatible with current legislation, the remaining parts of the document shall remain unaffected by this in their content and validity.

 

Latest Update: 2nd January 2018

Project Technical Lead Engineer - Sensors

Job Title
Project Technical Lead Engineer - Sensors
Employer
Employer Description
Location
Short Job Description
Job Description

Job Purpose/Scope: 

This position will primarily be focused on PEPS door handle electronics and kick sensor modules which encompass the following technologies: capacitive sensing, hall effect sensing and small ECU processing with power supply circuitry and BUS communication options.  We're searching for an experienced automotive Project Technical Lead with demonstrated product experience.

Job Duties/Responsibilities:

  • Assist with electronics design for PEPS, Capacitive Sensing, door handle Electronics and Kick Sensors

  • Coordinating efforts among different engineering teams and locations
  • Lead / Support customer meetings representing electronics product development
  • Support internal team meetings to ensure all groups have pertinent information (documents and specifications) required to meet objectives
  • Prepare DFMEA and DVPR documents
  • Prepare internal specifications (Product, SOW, Component and Test)
  • Work with plants and testing groups to schedule DV/PV testing builds, provide testing specifications and documents and ensure all tests are run properly
  • Understand V-model process and CMMI level 2 requirements at a minimum
  • Take initiatives and introduce new ideas

 

Essential Functions:

Assisting in the design and development of capacitive sensors and modules for use in an automobile environment

  • Assisting in the generation of electrical schematics and PCB layout

  • Performing worst case analysis and component reliability studies

  • Participate in and support design gate reviews

  • Developing and maintaining product documentation

  • Product specifications

  • Component specifications

  • Test specifications and reports

  • SOW

  • DFMEA

  • DVPR

  • Risk analysis

  • EMC test plans

  • Working with test engineering to ensure product verification and validation is performed properly

  • Working with external test labs to validate and qualify products

  • Performing statistical analysis of data to predict the reliability and confidence level of the part

  • Assisting customer engineering teams with presentation of design concepts and evidence of design objectives being met.

 

Supervision Received and Given: 

Reports to the Team Leader, and/or Manager.

 

Educational Requirements: 

 

Bachelor’s Degree in Electrical Engineering and related field and 5 years’ experience in a related role.

Experience/Knowledge/Skills: 

  • 5 years’ experience in automotive industry
  • Technical judgment to solve problems
  • Good written and oral communication skills
  • Good organization skills (ability to track project timing using MS project or other tool)
  • Good customer service skills
  • Experience developing/maintaining DFMEA/DVPR and product specifications
  • Experience with MS Office tools (Excel/PowerPoint/Word/Project)
  • Familiar with 6 sigma tools preferred
  • Understanding of TS16949 quality standards preferred
  • Experience with LIN, CAN, ISO9141 driver interfaces preferred
  • Experience with fault detection and diagnostics strategies preferred
  • Experience with 8 bit microcontrollers (i.e. PIC) preferred
  • Knowledge of capacitive sensing is a strong desire
  • Experience with DOORS requirements capture is a plus
  • Experience with electronics test equipment (scopes, analyzers, Arbs, etc…)
  • Experience with Mentor Graphics Expedition and Designer is a plus
Experience
Job Requirements
Job Benefits

We offer:

  • Competitive salary package
  • Motivating job contributing to the most advanced automotive technology
  • Be part of a friendly environment and work with experienced colleagues
Apply Information

Apply online at: careers.hufna.com

Salary
Job Type
Fulltime
Contract Type
Temporary
Region
Farmington Hills (MI), USA
Contact
Michael Baker
Huf North America
Michael Baker
24860 Hathaway St.
Farmington Hills, MI 48335
Phone: (248)991-3613
michael.baker@huf-group.com
Sector
Category
Job_offers_EN
Discipline
Education
Employees with previous experience