Choose language


Responsible for these pages:

Huf Hülsbeck & Fürst GmbH & Co. KG 

Communications and Public Relations Department

Steeger Str. 17 

42551 Velbert / Germany 

Postfach 10 04 80 

42504 Velbert / Germany 

Telephone: +49 (0)2051 272-0 

Fax central: +49 (0)2051 272-207 

Fax BOD : +49 (0)2051 272-460  

Huf Hülsbeck & Fürst GmbH & Co. KG is a limited commercial partnership registered under German law in Wuppertal, with headquarters in Velbert, Germany.  

Registeration No. HR A 20794.

Huf Industrieverwaltung GmbH with headquarters in Velbert is the personally liable partner registered under German law in Wuppertal, Germany.

Registeration No. HR B 17217.

Chief Operating Officers: Thomas Tomakidi, Dr. Florian Hesse, Johann Palluch.  

VAT identification NO.:  DE 121544714



Content of the online presence

The author shall assume no liability for the topicality, correctness or quality of the information provided. Claims for liability against author which are based upon damage of a material or immaterial type, caused through the use or non-use of the information represented or through the use of incorrect or incomplete information, shall be fundamentally excluded provided it cannot be proved that the author acted with intent and/or was grossly negligent. All offers are without engagement and non-binding. The author expressly reserves the right to modify, supplement or delete sections of the pages or the entire offer without specific notification or to suspend publication temporarily or entirely.


References and links

Liability in the case of direct or indirect references to third-party web pages (links), outside the area of responsibility of the author, may only be derived when the author has knowledge of the content and when it would be technically possible and reasonable to prevent a use of any illegal content. Therefore, the author declares expressly that at the time of setting-up the links no illegal content on the pages to be linked was recognisable. The author has no influence whatsoever on the current and future design, content or copyright status of the linked pages. He/She, therefore, distance him/herself expressly from any content on the linked pages that was/has been modified since the links were set-up. This statement applies to all links and references set-up by the author within own internet presence as well as to all third-party entries in guest books, discussion forums, link directories, mailing lists and any other types of database to whose content written access is possible from external sources. The provider of the page to which reference is made shall be solely liable for any illegal, incorrect or incomplete content and, in particular, for any damage ensuing from a use or non-use of such types of information represented and not that party that merely makes reference to respective publications via links.


Copyrights and trademark rights

In all publications the author shall endeavour to observe the copyrights associated with the graphics, sound documents, video sequences and texts used, to utilise graphics, sound documents, video sequences and texts prepared by author him/herself or to fall back on graphics, sound documents, video sequences and texts that are licence-free. All brands and trademarks mentioned within the internet presence and possibly protected by third parties shall be unlimitedly subject to the provisions of the currently valid trademark legislation and the ownership rights of the respectively registered owner. It may not be concluded from a simple mention that trademarks are not protected by third-party rights! The copyright for published objects, furnished by author him/herself, shall remain solely with the author of the pages. Any duplication or utilisation of such graphics, sound documents, video sequences and texts in other electronic or printed publications shall not be permissible without the express consent of the author.


Legal validity of the disclaimer

This disclaimer of liability is to be regarded as a part of the internet presence to which reference has been made on this page. Should parts or individual formulations in this text not, no longer or not fully be compatible with current legislation, the remaining parts of the document shall remain unaffected by this in their content and validity.


Latest Update: 2nd January 2018

Embedded Software Developer

Job Title
Embedded Software Developer
Employer Description
Short Job Description
Job Description

Department Purpose: 

Engineer innovative Passive Entry Passive Start products for automotive electronics to meet the current/advance customer and industry needs.


Job Purpose/Scope: 

Design and develop high quality embedded software for Huf Mechatronics products.

Work on SW components and designs in a rich and challenging global team environment to create solutions fulfilling internal & customer product requirements.

Job Duties/Responsibilities:

Execute software tasks spanning the entire software development lifecycle, including planning, requirements analysis, design, code, test, defect resolution, and production release. Design, develop and code software components based on Huf-defined software architecture for core and/or application specific software requirements on a project.


  • Interface with customer & system engineers to understand product requirements

  • Provide technical leadership to project team to perform design to deployment related activities

  • Support the process of deriving, interpreting, clarifying, and improving Software requirements

  • Define and document architecture which meets requirements and hardware/system constraints

  • Provide SW related non-functional estimates (latency, timing, memory, etc.) to system design

  • Develop software using C/C++ as per defined SW architecture and requirements as needed

  • Design SW modules using UML based tools (IBM Rhapsody) or message flow charts

  • Interface with global development teams to jointly develop and/or modify SW components

  • Co-ordinate and plan for integration of core and/or 3rd party SDKs or software stacks as required

  • Perform basic bench level tests and advanced system tests SW to confirm functionality.

  • Document lessons learnt, design or implementation details, task list, technical know-how papers, trainings, etc.…

  • Support with white box, functional/component and system tests by defining test criterion and help resolve issues as they arise

  • Responsible for planning, scheduling, monitoring and reporting of all software related activities for project

  • Diagnose, troubleshoot, and support the deployment of software systems as well as application software components.

  • Perform other duties as necessary for completion of projects and achievement of departmental goals

  • Sync with global locations such as Germany and Romania to ensure common global practices and procedures are maintained.

  • Work within the parameters of V-model process and CMMI level 2 requirements at a minimum

  • Mentor and coach junior engineers in best-practices in software development & Huf methods

  • Prepare and plan improvements for standards & work processes, SDLC, documentation, specifications, methods, etc.

  • Update job knowledge by studying current and/or new technologies, state-of-the-art development tools, programming techniques, and computing equipment, etc.


    Supervision Received and Given: 

    Reports to Software Manager


    Educational Requirements: 

    Minimum Bachelor’s degree in Electrical Engineering/Computer Science.

    Master’s degree preferred



  • Minimum 5+ years’ experience or equivalent education in the engineering discipline

  • Working knowledge of in-vehicle networks such as CAN and LIN.

  • Experience interfacing with automotive OEM, Tier 1, or suppliers

  • Excellent knowledge of embedded software(C/C++) development and debugging.

  • Experience in writing technical documentation (requirements, design specifications, test plans, etc.)

  • Good communication skills

  • Professional and good team player


Specialized Working Conditions and % Travel:  (i.e.: hearing, vision, extreme temperatures)


Travel to Germany/Romania/Mexico may be required for a 2 week training session and periodic   shorter trips may be necessary for project/design reviews. Travel will be <5%

Job Requirements
Job Benefits

We offer:

  • Competitive salary package
  • Motivating job contributing to the most advanced automotive technology
  • Be part of a friendly environment and work with experienced colleagues
Apply Information

Apply online at:

Job Type
Contract Type
Farmington Hills (MI), USA
Michael Baker
Huf North America
Michael Baker
24860 Hathaway St.
Farmington Hills, MI 48335
Phone: (248)991-3613
Employees with previous experience