Choose language

Imprint

Responsible for these pages:

Huf Hülsbeck & Fürst GmbH & Co. KG 

Communications and Public Relations Department

Steeger Str. 17 

42551 Velbert / Germany 

Postfach 10 04 80 

42504 Velbert / Germany 

Telephone: +49 (0)2051 272-0 

Fax central: +49 (0)2051 272-207 

Fax BOD : +49 (0)2051 272-460  

E-Mail: info(at)huf-group.com 

Huf Hülsbeck & Fürst GmbH & Co. KG is a limited commercial partnership registered under German law in Wuppertal, with headquarters in Velbert, Germany.  

Registeration No. HR A 20794.

Huf Industrieverwaltung GmbH with headquarters in Velbert is the personally liable partner registered under German law in Wuppertal, Germany.

Registeration No. HR B 17217.

Chief Operating Officers: Thomas Tomakidi, Tom Graf, Michael Supe.  

VAT identification NO.:  DE 121544714

Disclaimer 

 

Content of the online presence

The author shall assume no liability for the topicality, correctness or quality of the information provided. Claims for liability against author which are based upon damage of a material or immaterial type, caused through the use or non-use of the information represented or through the use of incorrect or incomplete information, shall be fundamentally excluded provided it cannot be proved that the author acted with intent and/or was grossly negligent. All offers are without engagement and non-binding. The author expressly reserves the right to modify, supplement or delete sections of the pages or the entire offer without specific notification or to suspend publication temporarily or entirely.

 

References and links

Liability in the case of direct or indirect references to third-party web pages (links), outside the area of responsibility of the author, may only be derived when the author has knowledge of the content and when it would be technically possible and reasonable to prevent a use of any illegal content. Therefore, the author declares expressly that at the time of setting-up the links no illegal content on the pages to be linked was recognisable. The author has no influence whatsoever on the current and future design, content or copyright status of the linked pages. He/She, therefore, distance him/herself expressly from any content on the linked pages that was/has been modified since the links were set-up. This statement applies to all links and references set-up by the author within own internet presence as well as to all third-party entries in guest books, discussion forums, link directories, mailing lists and any other types of database to whose content written access is possible from external sources. The provider of the page to which reference is made shall be solely liable for any illegal, incorrect or incomplete content and, in particular, for any damage ensuing from a use or non-use of such types of information represented and not that party that merely makes reference to respective publications via links.

 

Copyrights and trademark rights

In all publications the author shall endeavour to observe the copyrights associated with the graphics, sound documents, video sequences and texts used, to utilise graphics, sound documents, video sequences and texts prepared by author him/herself or to fall back on graphics, sound documents, video sequences and texts that are licence-free. All brands and trademarks mentioned within the internet presence and possibly protected by third parties shall be unlimitedly subject to the provisions of the currently valid trademark legislation and the ownership rights of the respectively registered owner. It may not be concluded from a simple mention that trademarks are not protected by third-party rights! The copyright for published objects, furnished by author him/herself, shall remain solely with the author of the pages. Any duplication or utilisation of such graphics, sound documents, video sequences and texts in other electronic or printed publications shall not be permissible without the express consent of the author.

 

Legal validity of the disclaimer

This disclaimer of liability is to be regarded as a part of the internet presence to which reference has been made on this page. Should parts or individual formulations in this text not, no longer or not fully be compatible with current legislation, the remaining parts of the document shall remain unaffected by this in their content and validity.

 

Latest Update: 2nd January 2019

Quality Engineer Product Development

Job Title
Quality Engineer Product Development
Employer
Employer Description
Location
Short Job Description
Job Description

Department Purpose:   

 

Provide quality oversight of product development. Ensure that all required quality assurance activities during this phase within a project are defined, planned, performed, verified and documented.

           

Job Duties/Responsibilities:

This role will ensure that all required quality assurance activities during product development within a project are defined, planned, performed, verified and documented.

Essential Functions:

  • Establish measures to prevent product errors caused during development phase of product development.
  • Focus Quality Management on Product Life Cycle.
  • Track and evaluate development process, as specified in Huf Corporate Business Management System (CBMS).
  • Create Quality Management plan, contribute to tailoring, and provide team-coaching.
  • Provide audit and assessment information and definitions (i.e. check process quality) and track measures.
  • Monitor verification and validation of various product development processes/stages.
  • Manage implementation of quality assurance activities during product development phase

  • Monitor compliance of project work against defined process standards

  • Coaching of project team regarding process compliance

  • Preparation of project teams for assessments & audits (e.g. ASPICE, CMMI)

  • Execution of internal assessments & audits

 

Supervision Received and Given: 

 

Reports to Quality Director

Educational Requirements: 

Bachelor degree or above in Systems Engineering, Electronics Engineering or Computer Science

Experience/Knowledge/Skills:

  • Five (5) plus years’ quality profession experience including automotive or similar industry exposure.
  • Practical applied experience and / or certifications in Quality Technology disciplines such as
  • Six Sigma, Kaizen, SPC, Design of Experiments, Quality System Certifications of TS 16949 and Auditing.
  • Several years working experience in quality assurance for electronics and mechatronic products

  • Expert skills in process assessment models (e.g. ASPICE, CMMI) and quality assurance methods like reviews, metrics etc.

  • Strong numerical analysis skills.
  • Solid interpersonal verbal and written communication skills required.

     

     

    Specialized Working Conditions and % Travel:  (i.e.: hearing, vision, extreme temperatures)

     

    The worker is required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading; visual inspection involving small defects, small parts. Sedentary work. Exerting up to 10 pounds of force occasionally and/or negligible amount of force frequently or constantly to lift, carry, push, pull or otherwise move objects, including the human body. Some travel to plants in TN and Mexico may be required depending on product manufacturing status. Travel to Germany will be required for a 2 week training session and periodic shorter trips may be necessary for design reviews.

Experience
Job Requirements
Job Benefits

We offer:

  • Competitive salary package
  • Motivating job contributing to the most advanced automotive technology
  • Be part of a friendly environment and work with experienced colleagues

 

Apply Information

 

 

 

 

Salary
Job Type
Fulltime
Contract Type
Temporary
Region
Farmington Hills (MI), USA
Contact
Michael Baker
Huf North America
Michael Baker
24860 Hathaway St.
Farmington Hills, MI 48335
Phone: (248)991-3613
michael.baker@huf-group.com
Sector
Category
Job_offers_EN
Discipline
Education
Employees with previous experience